home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-13 / goldw20.zip / MANUAL.DOC < prev    next >
Text File  |  1991-12-29  |  12KB  |  331 lines

  1. -
  2.  
  3.  
  4.  
  5.  
  6.  
  7.  
  8.  
  9.  
  10.  
  11.  
  12.  
  13.  
  14.  
  15.  
  16.  
  17.  
  18.  
  19.  
  20.                                  
  21.  
  22.  
  23.                       fastword GOLD (tm) Text/Batch File Editor
  24.  
  25.                                     Version 2.0
  26.                             Copyright (C) 1991 - 1992 by:
  27.  
  28.                                  Jack W Hildenbrand
  29.                                    9500 St.Rt.61
  30.                              Berlin Hts.,  Ohio   44814
  31.                                Phone 1 (419) 588-3608
  32.  
  33.                             Support BBS: 1 (419) 588-3615
  34.                             3/12/2400  N81F    24 Hrs/Day
  35.  
  36.  
  37.                                    Distributed By:
  38.  
  39.                                     jwh:SoftWare
  40.                                     P.O. Box 410
  41.                              Berlin Hts.,  Ohio   44814
  42.  
  43.  
  44.  
  45.  
  46.  
  47.  
  48.  
  49.  
  50.  
  51.  
  52.  
  53.  
  54.  
  55.  
  56.  
  57.  
  58.  
  59.  
  60.  
  61.  
  62.  
  63.  
  64.  
  65.  
  66. -
  67.  
  68.  
  69.  
  70.          Available options while in the editor.
  71.          =====================================:>
  72.  
  73.          Option              Reaction to option
  74.          ~~~~~~              ~~~~~~~~~~~~~~~~~~
  75.          Esc................ Use this option to exit the phone book module.
  76.  
  77.          F1=Menu............ Use this option to access the Command Menu.
  78.  
  79.  
  80.  
  81.          Available options while at the Command Menu.
  82.          ===========================================:>
  83.  
  84.          Option              Reaction to option
  85.          ~~~~~~              ~~~~~~~~~~~~~~~~~~
  86.          Esc................ Returns control to the editor.
  87.  
  88.          F10=Run Batch...... This option allows you to execute DOS or batch
  89.                              file commands.  When you select this option,
  90.                              all lines in the current text file will be
  91.                              executed at the DOS level as if they were being
  92.                              executed from a batch file.
  93.  
  94.          A>- Save....Return. After selecting this option, the current file-
  95.                              name will be displayed in an editor box. You
  96.                              may edit the existing filename and then press
  97.                              enter to save it. After saving you will be
  98.                              returned back to the editor.
  99.  
  100.          B>- Save......Exit. This option works just like the A>- option
  101.                              above with the exception of, you will be
  102.                              returned to DOS after saving the file.
  103.  
  104.          C>- Open..Existing. After selecting this option, you will be
  105.                              presented with a field that you can edit the
  106.                              file spec for files that you want listed for
  107.                              opening.  DOS wild cards are permitted here.
  108.                              
  109.                              After entering the file spec, all files in the
  110.                              current path that match the file spec will be
  111.                              listed in a scrollable window for you to select
  112.                              from.
  113.  
  114.              NOTE !  If you currently have a text file loaded and have made
  115.                      any changes to this file, you will be asked if you want
  116.                      to save changes before opening a new file.
  117.  
  118.          D>- Create.....New. After selecting this option, you will be
  119.                              presented with a field to enter a new filename.
  120.                              Any legal DOS filename can be used.
  121.                              
  122.              NOTE !  If you currently have a text file loaded and have made
  123.                      any changes to this file, you will be asked if you want
  124.                      to save changes before creating a new file.
  125.  
  126.  
  127.  
  128.  
  129.  
  130.                                       Page 1
  131.  
  132. -
  133.  
  134.  
  135.  
  136.          E>- Change....Path. This option allows you to change the current
  137.                              drive and directory that will be used for
  138.                              saving and opening text files from.
  139.  
  140.                              After selecting this option, you will be given
  141.                              a scrollable window with a list of the drives
  142.                              on your system. Simply move the highlight bar
  143.                              to the desired drive and press the enter key.
  144.  
  145.                              After selecting the drive, you will be given a
  146.                              scrollable window with a list of the
  147.                              directories on your system. Simply move the
  148.                              highlight bar to the directory you want and
  149.                              then press the enter key.
  150.  
  151.                              After selecting the directory, you will be
  152.                              returned to the editor and the new path will be
  153.                              listed at the top of your screen. Any future
  154.                              Saves or Opens will be performed from this new
  155.                              path (drive/directory).
  156.  
  157.          F>- Tab......(4 ).. This option provides you with a way of changing
  158.                              the number of spaces the cursor moves to the
  159.                              right every time you press the Tab key.
  160.  
  161.              NOTE !  Pressing the Shift key plus the Tab key will move the
  162.                      cursor in the left direction.
  163.  
  164.          G>- Margin...(255). This option provides you with a way of setting
  165.                              the right text margin.  The right margin may be
  166.                              set anywhere from 10 to 255.  Setting the
  167.                              margin to 0 will cause a 255 character right
  168.                              margin. Wordwrap will occur at the right margin
  169.                              setting.
  170.  
  171.          H>- Print.....File. Selecting this option will send the currently
  172.                              opened text file to any printer connected to
  173.                              printer port LPT1.
  174.  
  175.          I>- Clear...Editor. Selecting this option will clear all text from
  176.                              the editor.
  177.  
  178.             NOTE !  If you currently have a text file loaded and have made
  179.                     any changes to this file, you will be asked if you want
  180.                     to save changes before clearing the text.
  181.  
  182.          J>- Delete....Line. Selecting this option will delete the line at
  183.                              the current cursor location.
  184.  
  185.              NOTE !  Every time you delete a line with this option it is
  186.                      saved and replaces any text that is currently in the
  187.                      paste buffer.  You can replace any deleted line by
  188.                      placing the cursor on a blank line and then selecting
  189.                      the Insert option.
  190.  
  191.                      Just remember, if you have text saved in the paste
  192.                      buffer, it will be replaced with any text from a
  193.                      deleted line.
  194.  
  195.  
  196.                                       Page 2
  197.  
  198. -
  199.  
  200.  
  201.  
  202.          K>- Insert....Line. Selecting this option will insert a blank line
  203.                              at the current cursor location.
  204.  
  205.          L>- Copy........... Selecting this option will save any marked
  206.                              block of text to the paste buffer.
  207.  
  208.                              You must first mark a block of text before this
  209.                              option can be used.
  210.  
  211.                              Marking a block of text can be done by holding
  212.                              the Shift key down while moving the cursor with
  213.                              the arrow keys or by holding your left mouse
  214.                              button down and draging the mouse cursor. The
  215.                              block will be marked with dashed lines.
  216.  
  217.          M>- Delete......... Selecting this option will delete any marked
  218.                              block of text.
  219.  
  220.                              Any text that has been deleted with this option
  221.                              will be saved to the paste buffer.
  222.  
  223.                              Marking a block of text can be done by holding
  224.                              the Shift key down while moving the cursor with
  225.                              the arrow keys or by holding your left mouse
  226.                              button down and dragging the mouse cursor. The
  227.                              block will be marked with dashed lines.
  228.  
  229.          N>- Paste.......... Selecting this option will paste any block of
  230.                              text that has been saved to the paste buffer.
  231.                              The block of text will be pasted at the current
  232.                              cursor location.
  233.  
  234.          O>- Print.......... Selecting this option will send any block of
  235.                              text that has been previously saved to the
  236.                              paste buffer to any printer connected to
  237.                              printer port LPT1.
  238.  
  239.  
  240.          Editor hot keys and commands.
  241.          ============================:>
  242.  
  243.          Insert............. Toggles between insert and overtype mode.
  244.  
  245.                              Red cursor designates insert mode.
  246.                              ~~~
  247.                              White cursor designates overtype mode.
  248.                              ~~~~~
  249.  
  250.          Tab................ Moves cursor right (tab spaces).
  251.  
  252.          Shift+Tab.......... Moves cursor left (tab spaces).
  253.  
  254.          Delete............. Removes the character at the cursor location.
  255.  
  256.          Home............... Moves cursor full left of text at cursor line.
  257.  
  258.  
  259.  
  260.  
  261.  
  262.                                       Page 3
  263.  
  264. -
  265.  
  266.  
  267.  
  268.          Ctrl+Home.......... Moves cursor to top of screen.
  269.  
  270.          End................ Moves cursor full right of text at cursor line.
  271.  
  272.          Ctrl+End........... Moves cursor to bottom of screen.
  273.  
  274.          PgUp............... Moves text up 25 lines each press.
  275.  
  276.          Ctrl+PgUp.......... Moves to top of text file.
  277.  
  278.          PgDn............... Moves text down 25 lines each press.
  279.  
  280.          Ctrl+PgDn.......... Moves to bottom of text file.
  281.  
  282.          Up/Dn Arrows....... Moves cursor up/down on line each press.
  283.          
  284.          Right/Left Arrows.. Moves cursor right/left one space each press.
  285.  
  286.          Ctrl+Y............. Delete the line at cursor location.
  287.  
  288.          Ctrl+N............. Insert a blank line at the cursor location.
  289.  
  290.  
  291.          BLOCK OPERATIONS
  292.          ~~~~~~~~~~~~~~~~
  293.          Ctrl+Arrow Keys.... Mark a block of text.
  294.  
  295.          Ctrl+Delete........ Delete a block of text.
  296.  
  297.          Ctrl+Insert........ Insert a block of text.
  298.  
  299.          Pressing any key except the Esc key will save a marked block.
  300.  
  301.          
  302.  
  303.  
  304.  
  305.  
  306.  
  307.  
  308.          DISCLAIMER
  309.  
  310.          Users must accept this disclaimer of warranty: This application is
  311.          supplied as is.  The author disclaims all warranties, expressed or
  312.          implied, including, without limitation, the warranties of
  313.          merchantability and of fitness for any purpose.  The author
  314.          assumes no liability for damages, direct or consequential, which
  315.          may result from the use of this application.
  316.  
  317.             jwh: SoftWare
  318.             PO Box 410     9500 St.Rt.61
  319.             Berlin Heights,   Ohio 44814
  320.             Phone (419) 588-3608
  321.  
  322.  
  323.  
  324.  
  325.  
  326.  
  327.  
  328.                                        Page 4
  329.  
  330. -
  331.